O-Liner | Oil

For operators of industrial oil pipelines, the corrosive effect of the raw material is one of the biggest challenges.

The O-Liner is a quick solution for rehabilitating pressure pipelines that also acts as a protective barrier between oil and pipe. Its media-specific inner layer made of thermoplastic polyurethane (TPU) is particularly corrosion-resistant.

The Primus Line O-Liner is suitable for the following applications in the oil sector:

Crude oil
Refined petroleum products
Process water
Diesel
Jet A1
Kerosene

Would you like to use the O-Liner for applications in the oil sector other than those listed here? Then ask our technicians.

Back to Liner

Variants

Type MD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure	Weight
MD 150	134 mm	6.0 mm	122 mm	2,030 psi	548 psi	2.3 kg/m
MD 150 SD	150 mm	6.0 mm	138 mm	1,740 psi	465 psi	2.6 kg/m
MD 200	183 mm	6.0 mm	171 mm	1,450 psi	390 psi	3.2 kg/m
MD 203 SD	205 mm	6.0 mm	193 mm	1,218 psi	321 psi	3.7 kg/m
MD 250	237 mm	6.0 mm	225 mm	1,088 psi	289 psi	4.3 kg/m
MD 261 SD	261 mm	6.0 mm	249 mm	928 psi	249 psi	4.7 kg/m
MD 300	284 mm	6.0 mm	272 mm	928 psi	249 psi	5.2 kg/m
MD 350	312 mm	6.0 mm	300 mm	725 psi	198 psi	5.7 kg/m
MD 400	354 mm	6.0 mm	342 mm	667 psi	184 psi	6.5 kg/m
MD 450	408 mm	6.0 mm	396 mm	580 psi	166 psi	7.5 kg/m
MD 500	454 mm	6.0 mm	442 mm	580 psi	155 psi	8.4 kg/m

Type HD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure	Weight
HD 150 SD	155 mm	8.0 mm	139 mm	2,987 psi	779 psi	3.5 kg/m
HD 200	187 mm	8.0 mm	171 mm	2,509 psi	660 psi	4.3 kg/m
HD 250	241 mm	8.0 mm	225 mm	1,856 psi	498 psi	5.6 kg/m
HD 300	288 mm	8.0 mm	272 mm	1,595 psi	433 psi	6.7 kg/m
HD 400	357 mm	8.0 mm	341 mm	1,189 psi	332 psi	8.6 kg/m

O-Liner | Oil

For operators of industrial oil pipelines, the corrosive effect of the raw material is one of the biggest challenges.

Variants

Type MD

Type HD

Your product watchlist