Karriere
R-Connector | Resin
The principle of a tension-resistant connection between liner and R-Connector is always the same: The outer sleeve has an inner jacket made of malleable steel. Under high pressure, a two-component resin is pressed through the valve which presses the steel jacket and the liner into the profile of the core. This creates a durable and stable unit once the resin has hardened.
For wall mounting in manholes, the connector is also available with a mounting plate. Connectors with welded ends are also available. This makes this type the most flexible of the Primus Line® connectors.
Features
- Available as welded, forged or partially cast version
- DIN and ANSI materials available, material requests can be taken into account in the connector core
- Compatible with liner types ND, MD and HD
- Available in nominal sizes from DN 150 to DN 500 with flanges according to DIN, ANSI and AS4087
- Project-specific solutions are available on request
Connection with flange
Press sleeve with malleable steel jacket
Core
Gasket
Valve for pumping in two-component resin
Connection welded
Press sleeve
Gasket
Core
Valve
Connection with wall plate
Core
Gasket
Valve
Press sleeve
Wall plate
Variants
R
| Variant | Maximum operating pressure | Maximum operating temperature | Liner compatibility |
|---|---|---|---|
| DN 150 - DN 500 | 1.189 psi | 50 °C | ND, MD, HD |