G-Liner | Gas

Primus Line^® is referenced in DVGW VP 643 for the trenchless rehabilitation of gas high-pressure pipelines with operating pressures over 16 bar.

The Primus Line G-Liner is suitable for operation with the following gaseous media:

Would you like to use the G-Liner for gases other than those listed here? Then ask our technicians.

Additional information on the variants

¹ determined according to ISO 9080 for gases at 20 °C
² liner labeling may differ due to different calculation basis

Variants

Type MD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure¹⁺²	Weight
MD 150	134 mm	6.0 mm	122 mm	2,030 psi	508 psi	2.4 kg/m
MD 150 SD	150 mm	6.0 mm	138 mm	1,740 psi	435 psi	2.7 kg/m
MD 200	183 mm	6.0 mm	171 mm	1,450 psi	363 psi	3.3 kg/m
MD 203 SD	205 mm	6.0 mm	193 mm	1,218 psi	305 psi	3.8 kg/m
MD 250	237 mm	6.0 mm	225 mm	1,088 psi	261 psi	4.4 kg/m
MD 261 SD	261 mm	6.0 mm	249 mm	928 psi	232 psi	4.9 kg/m
MD 300	284 mm	6.0 mm	272 mm	928 psi	232 psi	5.3 kg/m
MD 350	312 mm	6.0 mm	300 mm	725 psi	174 psi	5.9 kg/m
MD 400	354 mm	6.0 mm	342 mm	667 psi	160 psi	6.7 kg/m
MD 450	408 mm	6.0 mm	396 mm	580 psi	145 psi	7.8 kg/m
MD 500	454 mm	6.0 mm	442 mm	580 psi	145 psi	8.6 kg/m

Type HD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure¹⁺²	Weight
HD 150 SD	155 mm	8.0 mm	139 mm	2,987 psi	740 psi	3.6 kg/m
HD 200	187 mm	8.0 mm	171 mm	2,509 psi	624 psi	4.4 kg/m
HD 250	241 mm	8.0 mm	225 mm	1,856 psi	464 psi	5.8 kg/m
HD 300	288 mm	8.0 mm	272 mm	1,595 psi	392 psi	6.9 kg/m
HD 400	357 mm	8.0 mm	341 mm	1,189 psi	290 psi	8.8 kg/m