G-Liner | Gas

Primus Line^® is referenced in DVGW VP 643 for the trenchless rehabilitation of gas high-pressure pipelines with operating pressures over 16 bar.

The Primus Line G-Liner is suitable for operation with the following gaseous media:

Would you like to use the G-Liner for gases other than those listed here? Then ask our technicians.

Additional information on the variants

¹ determined according to ISO 9080 for gases at 68 °F
² liner labeling may differ due to different calculation basis

Variants

Type MD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure¹⁺²	Weight
MD 150	5.28 in	0.24 in	4.80 in	2,030 psi	508 psi	1.6 lbs/ft
MD 150 SD	5.91 in	0.24 in	5.43 in	1,740 psi	435 psi	1.8 lbs/ft
MD 200	7.20 in	0.24 in	6.73 in	1,450 psi	363 psi	2.2 lbs/ft
MD 203 SD	8.07 in	0.24 in	7.60 in	1,218 psi	305 psi	2.5 lbs/ft
MD 250	9.33 in	0.24 in	8.86 in	1,088 psi	261 psi	3.0 lbs/ft
MD 261 SD	10.28 in	0.24 in	9.80 in	928 psi	232 psi	3.3 lbs/ft
MD 300	11.18 in	0.24 in	10.71 in	928 psi	232 psi	3.6 lbs/ft
MD 350	12.28 in	0.24 in	11.81 in	725 psi	174 psi	3.9 lbs/ft
MD 400	13.94 in	0.24 in	13.46 in	667 psi	160 psi	4.5 lbs/ft
MD 450	16.06 in	0.24 in	15.59 in	580 psi	145 psi	5.2 lbs/ft
MD 500	17.87 in	0.24 in	17.40 in	580 psi	145 psi	5.8 lbs/ft

Type HD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure¹⁺²	Weight
HD 150 SD	6.10 in	0.31 in	5.47 in	2,987 psi	740 psi	2.4 lbs/ft
HD 200	7.36 in	0.31 in	6.73 in	2,509 psi	624 psi	3.0 lbs/ft
HD 250	9.49 in	0.31 in	8.86 in	1,856 psi	464 psi	3.9 lbs/ft
HD 300	11.34 in	0.31 in	10.71 in	1,595 psi	392 psi	4.7 lbs/ft
HD 400	14.06 in	0.31 in	13.43 in	1,189 psi	290 psi	5.9 lbs/ft