G-Liner

Primus Line^® is referenced in DVGW VP 643 for the trenchless rehabilitation of gas high-pressure pipelines with operating pressures over 16 bar.

The Primus Line G-Liner is suitable for operation with the following gaseous media:

Would you like to use the G-Liner for gases other than those listed here? Then ask our technicians.

Additional information on the variants

¹ determined according to ISO 9080 for gases at 20 °C
² liner labeling may differ due to different calculation basis

Variants

Type MD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure¹⁺²	Weight
MD 150-6-SD	150 mm	6.0 mm	138 mm	120 bar	30 bar	2.7 kg/m
MD 150-6	134 mm	6.0 mm	122 mm	140 bar	35 bar	2.4 kg/m
MD 200-8	183 mm	6.0 mm	171 mm	100 bar	25 bar	3.3 kg/m
MD 203-8-SD	205 mm	6.0 mm	193 mm	84 bar	21 bar	3.8 kg/m
MD 250-10	237 mm	6.0 mm	225 mm	75 bar	18 bar	4.4 kg/m
MD 261-10-SD	261 mm	6.0 mm	249 mm	64 bar	16 bar	4.9 kg/m
MD 300-12	284 mm	6.0 mm	272 mm	64 bar	16 bar	5.3 kg/m
MD 350-14	312 mm	6.0 mm	300 mm	50 bar	12 bar	5.9 kg/m
MD 400-16	354 mm	6.0 mm	342 mm	46 bar	11 bar	6.7 kg/m
MD 450-18	408 mm	6.0 mm	396 mm	40 bar	10 bar	7.8 kg/m
MD 500-20	454 mm	6.0 mm	442 mm	40 bar	10 bar	8.6 kg/m

Type HD

Variant	Outer diameter	Wall thickness	Inner diameter	Burst pressure	Operating pressure¹⁺²	Weight
HD 150-6-SD	155 mm	8.0 mm	139 mm	206 bar	51 bar	3.6 kg/m
HD 200-8	187 mm	8.0 mm	171 mm	173 bar	43 bar	4.4 kg/m
HD 250-10	241 mm	8.0 mm	225 mm	128 bar	32 bar	5.8 kg/m
HD 300-12	288 mm	8.0 mm	272 mm	110 bar	27 bar	6.9 kg/m
HD 400-16	357 mm	8.0 mm	341 mm	82 bar	20 bar	8.8 kg/m