Karriere
M-Connector | Mechanic
Only mechanical forces ensure that the liners are held securely in the M-connectors from Primus Line.
A tension-resistant connection between our flexible liner and the Primus Line M-Connector is created by purely mechanical forces. This is achieved by pressing the core into the bushing. Hydraulic tools suitable for construction sites are used for this purpose. This not only speeds up installation, but also allows the connector to be reused several times.
Features
- Mechanical clamping with plastic sleeve
- Available as cast or welded version
- DIN and ANSI materials available, material requests can be taken into account in the connector core
- Flange sheets and holes freely selectable
- Mounting on or with shaft wall plate possible
- Compatible with liner types ND and MD
- Available in nominal sizes from 6 inches to 20 inches with flanges in PN 10/PN 16 according to DIN, ANSI and AS4087
- Project-specific solutions are available on request
Core
Sleeve
Gasket
Bushing
Variants
M3
| Variant | Maximum operating pressure | Maximum operating temperature | Liner compatibility |
|---|---|---|---|
| DN 150 - DN 300 | 363 psi | 86 °F | ND |
M4
| Variant | Maximum operating pressure | Maximum operating temperature | Liner compatibility |
|---|---|---|---|
| DN 150 - DN 300 | 812 psi | 86 °F | ND, MD |
M5
| Variant | Maximum operating pressure | Maximum operating temperature | Liner compatibility |
|---|---|---|---|
| DN 150 - DN 350 | 812 psi | 140 °F | ND, MD |